The grades of seven commercial banking stocks are better this week, according to the Portfolio Grader database. Every one of these stocks has an “A” (“strong buy”) or “B” overall (“buy”) rating.
Top Net Payout Yield Stocks To Own For 2015: Universal Display Corp (OLED)
Universal Display Corporation, incorporated on April, 24, 1985, is engaged in the research, development and commercialization of organic light emitting diode (OLED) technologies and materials for use in flat panel display, solid state lighting and other product applications. The Company�� primary business strategy is to develop and license its OLED technologies to product manufacturers for use in these applications. Its primary business is to develop and license its OLED technologies to manufacturers of products for display applications, such as cell phones, portable media devices, tablets, laptop computers and televisions, and specialty and general lighting products; and develop new OLED materials and sell the materials to those product manufacturers. The Company sells its OLED materials to customers for evaluation and use in commercial OLED products. As of December 31, 2012, the Company owns, exclusively license or have the sole right to sublicense more than 3,000 patents issued and pending worldwide. On July 23, 2012, the Company entered into a Patent Sale Agreement (the Agreement) with FUJIFILM. Under the Agreement, FUJIFILM sold more than 1,200 OLED related patents and patent applications.
Phosphorescent Organic Light Emitting Diode Technologies
Phosphorescent OLEDs utilize specialized materials and device structures that allow OLEDs to emit light through a process known as phosphorescence. Traditional fluorescent OLEDs emit light through an inherently less efficient process. Theory and experiment show that phosphorescent OLEDs exhibit device efficiencies up to four times higher than those exhibited by fluorescent OLEDs. Phosphorescence substantially reduces the power requirements of an OLED and is potentially useful in displays for hand-held devices, such as Smartphone��, where battery power is often a limiting factor. Phosphorescence is also important for area displays such as televisions, where higher device efficiency and lower heat generation may enable longer ! product lifetimes and increased energy efficiency.
Additional Proprietary Organic Light Emitting Diode Technologies
Additional OLED Technologies include FOLED Flexible OLEDs, Thin-Film Encapsulation, UniversalP2OLED Printable Phosphorescent OLEDs, OVJP Organic Vapor Jet Printing, OVPD Organic Vapor Phase Deposition and TOLED Transparent OLEDs. The Company is working on a number of technologies required for the fabrication of OLEDs on flexible substrates. As of December 31, 2012, it was conducting research and development on FOLED technologies internally, under several of its United States government programs and in connection with the government-sponsored Flexible Display Center at Arizona State University (ASU). The Company announced its, patented encapsulation technology for the packaging of flexible OLEDs and other thin-film devices, as well as for use as a barrier film for plastic substrates. Its approach for manufacturing a small molecule OLED, including a PHOLED, is based on a vacuum thermal evaporation (VTE) process.
The Company has partnered with Aixtron AG, which is a manufacturer of metal-organic chemical vapor deposition equipment, to develop and qualify equipment for the fabrication of OLED displays utilizing the OVPD process. It has developed a technology for the fabrication of OLEDs that have transparent cathodes. TOLEDs use a transparent cathode and either a transparent, reflective or opaque metal anode.
Organic Light Emitting Diode Materials Supply Business
The Company supplies its proprietary UniversalPHOLED materials to display manufacturers and others. The Company qualifies its materials in OLED devices before shipment in order to ensure that they meet required specifications. During 2012, the Company continued supplying its proprietary UniversalPHOLED materials to SDC for use in its commercial AMOLED display products and for its development efforts. During 2012, the Company also supplied its UniversalPHOLED materials to! LG Displ! ay for use in its commercial AMOLED display products, to Tohoku Pioneer for use in its commercial PMOLED display products, and Konica Minolta for its manufacture of commercial OLED lighting products. During 2012, the Company also supplied its proprietary OLED materials to these and various other product manufacturers for evaluation and for purposes of development, manufacturing qualification and product testing.
The Company competes with Eastman Kodak Company (Kodak), Cambridge Display Technology, Ltd. (CDT), Sumitomo Chemical Company (Sumitomo), Idemitsu Kosan Co., Ltd. (Idemitsu Kosan), Merck KGaA and BASF Corporation.
Advisors' Opinion:- [By Steve Symington]
Shares of OLED technologist Universal Display� (NASDAQ: OLED ) are putting on quite a show today, falling more than 16% so far during intraday trading after the company's first-quarter results disappointed investors.
- [By Steve Symington]
What:�Shares of Universal Display Corporation (NASDAQ: OLED ) plunged 10% Monday following reports Samsung� (NASDAQOTH: SSNLF ) has abandoned plans to build a next-gen OLED television manufacturing facility.
Top 10 Semiconductor Stocks To Buy For 2014: Advanced Semiconductor Engineering Inc (ASX)
Advanced Semiconductor Engineering, Inc. is principally engaged in the manufacture, assembly, processing, testing and distribution of integrated circuits (ICs). The Company provides semiconductor packaging and testing services, including plastic leaded chip carriers (PLCCs), quad flat packages (QFPs) and flip chip packaging technology, among others, which are applied in the manufacture of household electrical appliances, communication devices, automobile components, personal computers, set top boxes, servers, memory integrated circuits (ICs), mobile phones, digital cameras, game consoles, projectors, high definition (HD) televisions, wireless communication network products and power management ICs, among others. The Company operates its businesses primarily in Taiwan, Europe and the Americas. In August 2010, the Company acquired a 100% interest in EEMS Test Singapore.
The Company is focused on packaging and testing logic semiconductors. The Company offers its customers turnkey services, which consist of packaging, testing and direct shipment of semiconductors to end users designated by its customers. The Company�� global base of over 200 customers includes semiconductor companies across a range of end use applications, including Altera Corporation, ATI Technologies, Inc., Broadcom Corporation, Cambridge Silicon Radio Limited and Microsoft Corporation. During the year ended December 31, 2008, the Company�� packaging revenues accounted for 77.7% of its net revenues and its testing revenues accounted for 20.1% of its net revenues.
Packaging Services
The Company offers a range of package types to meet the requirements of its customers, with a focus on packaging solutions. Within its portfolio of package types, the Company focuses on the packaging of semiconductors. These include advanced leadframe-based package types, such as quad flat package, thin quad flat package, bump chip carrier and quad flat no-lead package, and package types based on substrates, such a! s flip-chip ball grid array (BGA) and other BGA types, as well as other packages, such as wafer-bumping products. Leadframe-based packages are packaged by connecting the die, using wire bonders, to the leadframe with gold wire. The Company�� leadframe-based packages include quad flat package (QFP)/ thin quad flat package (TQFP), quad flat no-lead package (QFN)/microchip carrier (MCC), advanced quad flat no-lead package (AQFN), bump chip carrier (BCC), small outline plastic package (SOP)/thin small outline plastic package (TSOP), small outline plastic j-bend package (SOJ), plastic leaded chip carrier (PLCC) and plastic dual in-line package (PDIP). Substrate-based packages employ the BGA design, which utilizes a substrate rather than a leadframe. It also assembles system-in-a-package products, which involve the integration of more than one chip into the same package. The Company�� substrate-based packages include Plastic BGA, Cavity Down BGA, Stacked-Die BGA, Flip-Chip BGA and land grid array (LGA).
The Company�� wafer-level packaging products include wafer level chip scale package (aCSP) and advanced wafer level package (aWLP). The Company offers module assembly services, which combine one or more packaged semiconductors with other components in an integrated module to enable functionality, typically using surface mount technology (SMT) machines and other machinery and equipment for system-level assembly. End use applications for modules include cellular phones, personal digital assistant (PDAs), wireless local area network (LAN) applications, bluetooth applications, camera modules, automotive applications and toys.
The Company provides module assembly services primarily at its facilities in Korea for radio frequency and power amplifier modules used in wireless communications and automotive applications. Interconnect materials connect the input/output on the semiconductor dies to the printed circuit board. Interconnect materials include substrate, which is a multi-layer m! iniature ! printed circuit board. The Company produces substrates for use in its packaging operations.
Testing Services
The Company provides a range of semiconductor testing services, including front-end engineering testing, wafer probing, final testing of logic/mixed-signal/radio frequency (RF) and memory semiconductors and other test-related services. The Company provides front-end engineering testing services, including customized software development, electrical design validation, and reliability and failure analysis. The Company provides final testing services for a variety of memory products, such as static random access memory (SRAM), dynamic random access memory (DRAM), single-bit erasable programmable read-only memory semiconductors and flash memory semiconductors.
The Company provides a range of additional test-related services, including burn-in testing, module sip testing, dry pack, tape and reel, and electric interface board and mechanical test tool design. The Company offers drop shipment services for shipment of semiconductors directly to end users designated by its customers.
Advisors' Opinion:- [By Seth Jayson]
Advanced Semiconductor Engineering (NYSE: ASX ) is expected to report Q2 earnings around July 7. Here's what Wall Street wants to see:
- [By Namitha Jagadeesh]
The FTSE 100 Index (UKX) fell 1.31 points, less than 0.1 percent, to 6,679.77 at 10:12 a.m. in London, trimming an earlier decline of as much as 0.6 percent. The gauge has climbed 13 percent this year as central banks maintained stimulus measures to support the global economy. The broader FTSE All-Share Index (ASX) was also little changed today, while Ireland�� ISEQ Index retreated 0.3 percent.
- [By Jeff Reeves]
Next Page
Best Stocks to Buy for Around $5: Advanced Semiconductor Engineering (ASX)Advanced Semiconductor Engineering�(ASX) builds and distributes integrated circuits and other electronics. While that�� not as sexy as other chipmakers that play to mobile, it�� still a good business, considering the general demand for microchips in everything from cars to computers to TVs.
- [By Jeff Reeves]
Advanced Semiconductor Engineering�(ASX) builds and distributes integrated circuits and other electronics. It�� not as sexy as some mobile chipmakers, but thankfully it doesn�� have to be — ASX is simply capitalizing on the general demand for microchips in everything from cars to computers to TVs.
Top 10 Semiconductor Stocks To Buy For 2014: Camtek Ltd (CAMT)
Camtek Ltd. (Camtek), incorporated in 1987, designs, develops, manufactures and markets automated solutions dedicated for enhancing production processes and yield for the semiconductor manufacturing and packaging and the printed circuit board (PCB) and integrated circuit (IC) substrate industries. Camtek also designs, develops, manufactures and markets automated optical inspection (AOI), systems and related products. The Company�� AOI systems are used to enhance both production processes and yields for manufacturers in the semiconductor manufacturing and packaging industry and PCB and IC Substrate industry. Through the acquisition of Printar's assets, it also engaged in developing, manufacturing, sale and marketing of direct digital material deposition systems and inks for the PCB industry, with two major fields of activity: Solder Mask and Legend. In addition, through the acquisition of Sela, it is also engaged in the development, manufacturing and marketing of automated scanning electron microscope (SEM) and transmission electron microscope (TEM) sample preparation equipment, primarily for the semiconductor industry.
As of December 31, 2011, the Company had sold more than 2,500 AOI systems in 34 countries worldwide. The Company's PCB customer base includes the majority of the 100 PCB manufacturers worldwide. As of December 31, 2011, it had sold over 300 Falcon systems to more than 25 semiconductor manufacturers, among them outsourced semiconductor assembly and test (OSAT), integrated device manufacturers (IDM) and wafer level packaging subcontractors, including eight out of the top 10 semiconductors companies.
Camtek�� AOI systems consist of an electro-optical assembly unit, either movable or fixed, which consists of a video camera, precision optics and illumination sources. The electro-optical unit captures the image of the inspected product; a precise, either movable or fixed table, that holds the inspected product, and an electronic hardware unit, which operates the! entire system and includes embedded components that process and analyze the captured image by using its algorithms. Its systems can also compile and communicate statistical reports of inspection findings through the customer�� factory information system. The Company offers a range of systems for automated optical inspection of semiconductor wafers, IC substrates and PCBs. These systems are used to enhance production yields and assist in controlling manufacturing processes at wafer fabrication, test and assembly houses, and PCB plants worldwide.
The Company�� Falcon systems are designed for the back end market of the semiconductor industry. The Falcon�� advanced algorithms and inspection capabilities enable its dedicated models to detect defects in the die, which, if left undetected, may cause failure. The Condor is designed to meet the current and future inspection needs of the semiconductor industry. The Condor, through algorithms and advanced hardware configuration, is designed to enhance two dimensional (2D) and three dimensional (3D) detection abilities and increased throughput. The Condor family includes models for: 3D and 2D metrology and inspection of bumped-wafer prepared for packaging in the flip-chip technology; 2D metrology and inspection of finished wafers at the end of their manufacturing process and in test houses; Post-dicing inspection of frame-mounted wafers at assembly and packaging facilities, where it adds the value of detecting dicing-related damage, and inspection and metrology of micro-electro mechanical systems (MEMS) and other special applications.
Condor 5LED is an AOI system designed to provide solutions to a range of requirements that are to light emitting diode (LED) semiconductor manufacturers. The LED market�� special inspection requirements are characterized by 3-6 inch wafers, each of which may contain between 100 to over 200 thousand LED devices per wafer. Typically, the wafer is made of a translucent compound semiconductor, such as g! allium ar! senide, gallium phosphide and/or indium phosphide. The Gannet system is designed for the front end market of the semiconductor industry.
The Company�� AOI products for this industry consist of five product lines: the Phoenix, Dragon and Orion for the inspection of inner and outer layers of PCB panels and ultra-fine-line IC substrate; large area masks (LAM) dedicated for inspection of artwork; and the Pegasus for final inspection (AFI) of IC substrates and high density interconnect (HDI) panels. The Phoenix product family, introduced in November 2011, is designed to support a range of the demanding PCB and IC substrate applications, while keeping in pace with the dynamic technology changes in the industry. The Phoenix product family is enhanced with Spark - Camtek's and detection engine providing high detection capabilities, while minimizing false calls.
Dragon systems are high-throughput, automation-ready systems for inspection of all PCB types in a mass production environment. Dragon models are optimized for specific PCB technology ranges - from mainstream circuits of typically 100 (microns) conductor line width, up to high density substrates having 12 (microns) wide conductive lines. All Dragon models are designed to interface with automated material handling mechanisms provided by the Company or other automation suppliers. Orion systems are stand-alone AOI systems for high volume inspection of all PCB types designed to operate in inspectify mode of operation. Inspectify is a mode of operation enabling the operator to perform verification immediately after inspection on the same system, thus saving time and eliminating handling-related defects.
LAM is specially designed for main-stream LAM inspection. It offers unparalleled detection ability on LAM with down to 25 (microns) line/space width technology. The LAM incorporates advanced technology innovations to ensure the level of detection that these masks require at this critical production stage. Camtek offers! various ! stand-alone verification systems that enable verification of panels after inspection. The Pegasus line includes systems for automated inspection of finished IC substrates that are subsequently used in packaging of ball grid array (BGA) and Chip Scale Package (CSP) devices. The Pegasus inspects both sides of the substrate, detecting process and mechanical defects, in particular in the gold-plated areas, where the substrate will interconnect with the silicon die or the PCB, and in the solder-mask areas. Pegasus models handle substrates in strip format in magazines.
GreenJet is a SM digital printing system aimed to replace the conventional SM application lines for prototypes and high mix low volume production. The GreenJet system offers manufacturers flexible and digital SM printing technology solution. The LGP system incorporates PCB digital legend printing technologies with specially developed heat curable ink, resulting in output and system performance. Camtek has developed the inks for both LGP and GreenJet, which involves different chemicals mixed together in order to reach the required ink characterization.
The Company competes with Rudolph Technologies Inc., KLA-Tencor Corporation, Topcon Corporation, Toray Industries, Inc., Hitachi Ltd., Nidec Tosok Corporation., FEI Company, SII Nanotechnology Japan, Carl Zeiss, Inc., Orbotech Ltd., Dainippon Screen Manufacturing Company, Lloyd-Doyle Limited, Gigavis Co. Ltd., ATI Electronics Pty Ltd., Shirai Electronics Industrial Co. Ltd., First EIE SA and MicroCraft K.K.
Advisors' Opinion:- [By Bryan Murphy]
It's fun to be right, but it's also important to be right in a sustainable way. Otherwise, what's the point? While it remains to be seen if yours truly was right regarding his call last week on Camtek LTD. (NASDAQ:CAMT) [it's not looking ideal], it's worth another look at CAMT, if only to see how much progress has been made and what needs to happen now.
- [By Eddie Staley]
In trading on Tuesday, technology shares were relative laggards, down on the day by about 1.68 percent. Top decliners in the sector included Camtek (NASDAQ: CAMT), down 15.54 percent, and MakeMyTrip (NASDAQ: MMYT), off 11.85 percent.
- [By Garrett Cook]
In trading on Tuesday, technology shares were relative laggards, down on the day by about 1.68 percent. Top decliners in the sector included Camtek (NASDAQ: CAMT), down 16.3 percent, and MakeMyTrip (NASDAQ: MMYT), off 11.4 percent.
- [By Garrett Cook]
Technology shares gained around 1.13 percent in Tuesday’s trading. Top gainers in the sector included iGATE (NASDAQ: IGTE), up 7.7 percent, and Camtek (NASDAQ: CAMT), up 9.8 percent.
Top 10 Semiconductor Stocks To Buy For 2014: Intel Corporation(INTC)
Intel Corporation engages in the design, manufacture, and sale of integrated circuits for computing and communications industries worldwide. It offers microprocessor products used in notebooks, netbooks, desktops, servers, workstations, storage products, embedded applications, communications products, consumer electronics devices, and handhelds. The company also provides system on chip products that integrate its core processing functionalities with other system components, such as graphics, audio, and video, onto a single chip. In addition, it offers chipset products that send data between the microprocessor and input, display, and storage devices, including keyboard, mouse, monitor, hard drive, and CD, DVD, or Blu-ray drives; motherboards designed for desktop, server, and workstation platforms, and that has connectors for attaching devices to the bus; and wired and wireless connectivity products consisting of network adapters and embedded wireless cards used to translate and transmit data across networks. Further, the company provides NAND flash memory products primarily used in portable memory storage devices, digital camera memory cards, and solid-state drives; software products comprising operating systems, middleware, and tools used to develop, run, and manage various enterprise, consumer, embedded, and handheld devices; and software development tools that enable the creation of applications. Additionally, it develops computing platforms, which are integrated hardware and software computing technologies designed to offer an optimized solution. The company sells its products principally to original equipment manufacturers, original design manufacturers, PC components and other products users, and other manufacturers of industrial and communications equipment. It has a strategic alliance with Scientific Conservation Inc. Intel Corporation was founded in 1968 and is based in Santa Clara, California.
Advisors' Opinion:- [By Teresa Rivas]
In tech, upbeat reports from Yahoo!�(YHOO)�and Intel (INTC).
The Federal Reserve is also slated to release its Beige Book of economic conditions at 2 PM.
- [By Shauna O'Brien]
On Tuesday, Jefferies analyst Mark Lipacis reported that he has maintained a “Buy” rating on Intel Corporation (INTC).
Ahead of INTC’s Q4 earnings release, the analyst has reiterated a “Buy” rating and $32 price target on INTC. This price target suggests a 25% increase from the stock’s current price of $25.50. Lipacis noted that this stock is ideal for a long term investment as he sees significant upside in 2016.
Lipacis commented: “Long term our analysis indicates that Intel could have a 50% pricing advantage in processors in 12 months and a 66% in 36 months, which leads us to model share gains in tablets and smartphones and project a bull case EPS scenario of ~$3 in 2016. Lipacis said. Near term, we think momentum investors will find Intel’s bottoming gross margins and low expectations difficult to ignore. INTC remains our top big cap pick – we’re buyers in front of the earnings call.”
Intel shares were up 45 cents, or 1.76%, during pre-market trading Tuesday.
Top 10 Semiconductor Stocks To Buy For 2014: Advantest Corp (ATE)
Advantest Corporation, incorporated in December 1954, is a part of Advantest group. The Company operates in three segments: semiconductor and component test system segment; mechatronics system segment, focusing on peripheral devices including test handlers and device interfaces, and services, support and others segment. The semiconductor and component test system segment provides customers with test system products for the semiconductor industry and the electronic component industry. The mechatronics system segment focuses on peripheral devices to the semiconductor and component test systems. The services, support and others segment consists of comprehensive customer solutions provided in connection with the semiconductor and component test system and mechatronics system segments, support services and an equipment lease business.
Semiconductor and Component Test Systems Segment
Semiconductor and component test systems are used during the semiconductor and electronic component manufacturing process to confirm that a semiconductor functions properly. Semiconductor and component test systems consist of test systems for memory semiconductors and test systems for non memory semiconductors. Advantest�� test systems for memory semiconductors are test systems designed to test high-speed/high performance dynamic random access memory (DRAM) semiconductors used in equipment such as personal computers and servers, as well as flash memory semiconductors used in digital consumer products.
Test systems for memory semiconductors consist of a mainframe and one or more test heads. During testing, a device interface is attached to the test head. During the front-end testing process, wafers are loaded by a prober and are connected to the test system for memory semiconductors through the device interface. Electric signals between the die and the test systems for memory semiconductors are transmitted through probe pins located in the device interface and tested. After front-end te! sting is completed, the wafer is diced into separate dies and properly functioning dies are packaged. During back-end testing, test handlers are used to load these packaged devices onto the test heads, and electric signals are transmitted between the devices and the test heads via the device interface and tested. The test results are analyzed by the test systems for memory semiconductors��hardware circuits and software programs. Customized software programs for each semiconductor are required to analyze the semiconductor tests and test data.
Advantest�� main product lines of test systems for memory semiconductors are the T5500 series, the T5300 series and the T5700 series. The T5593 is a test system targeted at the market for high speed memory semiconductors, such as DDR2- Synchronous Dynamic Random Access Memory (SDRAM) and Synchronous Graphics Random Access Memory (SGRAM). The T5383 is a multi-functional test system for memory semiconductors that reduces testing costs for semiconductor manufacturers. Advantest�� main line of test systems for non memory semiconductors relates to test systems for SoC semiconductors, test systems for liquid crystal display (LCD) driver integrated circuits and test systems for semiconductors used in car electronics. The T6577 test systems for SoC semiconductors in the T6500 series were primarily developed to test micro controller unit (MCU) and SoC semiconductors that control digital consumer products at the production lines. The T6300 series are test systems for LCD driver integrated circuits used with high-definition LCD displays. The T7721, T7722 and T7723 are test systems for non memory semiconductors for mixed signal integrated circuits. The T8571A is a test system for non memory semiconductors that is primarily used to evaluate and analyze CCDs which are image sensors.
Mechatronics System Segment
The Main products in the Mechatronics System Segment are test handlers which handle semiconductor devices and automate the te! sting, an! d device interfaces which are the interfaces with devices being tested. Test handlers are used with semiconductor and component test systems to handle, condition temperature, contact and sort semiconductors and other electronic components during the back-end testing of the semiconductor manufacturing process. Advantest�� test handlers are sold primarily in conjunction with the sale of its semiconductor and component test systems. The M6242 test handler for test systems for memory semiconductors, including DDR-3SDRAM, can handle up to 512 semiconductors at a time. Advantest�� test handlers for non memory semiconductors, including SoC semiconductors, are the M4841, the M4741A and the M4742A, among others.
Advantest develops and manufactures device interfaces for semiconductor and component test systems and supplies device interfaces, such as high performance and high density connectors, socket boards and sockets. For test systems for memory semiconductors, Advantest provides motherboards capable of handling a maximum of 512 semiconductors at a time. For test systems for non memory semiconductors, Advantest provides motherboards that are compatible with a maximum of 3,072 signals. Advantest also provides motherboards designed for use in front-end testing. Advantest provides custom manufacturing of socket boards and performance boards for each device under test in accordance with customers��specifications.
Advantest provides sockets for test systems for memory semiconductors. Advantest provides low-inductance (0.4nH) sockets and fine pitch (0.4mm) sockets for semiconductors that are becoming more high-speed and more compact in size. Advantest provides carrying and contacting mechanism components compatible with each device under test for test handlers for memory semiconductors and test handlers for non memory semiconductors.
Services, Support and Others Segment
In the services, support and others segment, Advantest has focused on maintenance serv! ices, suc! h as installation and repair of Advantest�� products. It also focused on lease and rental services of its products as a part of Advantest�� effort to provide customers with comprehensive solutions.
The Company competes with Teradyne, Inc., Verigy Ltd., LTX-Credence Corporation, Yokogawa Electronic Corporation, FROM30 CO., LTD., EXICON Ltd., UniTest Inc., Delta Design, Inc., Seiko Epson Corporation, Mirae Corporation, TechWing, Inc., TSE Co., Ltd. and Secron Co., Ltd.
Advisors' Opinion:- [By Dan Carroll]
Nissan's done better this year than electronics maker Advantest (NYSE: ATE ) , but this stock absolutely blew up over the past week. Advantest's shares shot higher by more than 9%, wiping out pessimism over the company's weak earnings released a few weeks ago. Advantest's net loss and operating profit both fell below its guidance, and despite this week's investor optimism, the future's murky for this company. Financial site TheStreet downgraded the stock last week, citing Advantest's falling earnings, among other issues.
Top 10 Semiconductor Stocks To Buy For 2014: Advanced Semiconductor Engineering Inc (ASX)
Advanced Semiconductor Engineering, Inc. is principally engaged in the manufacture, assembly, processing, testing and distribution of integrated circuits (ICs). The Company provides semiconductor packaging and testing services, including plastic leaded chip carriers (PLCCs), quad flat packages (QFPs) and flip chip packaging technology, among others, which are applied in the manufacture of household electrical appliances, communication devices, automobile components, personal computers, set top boxes, servers, memory integrated circuits (ICs), mobile phones, digital cameras, game consoles, projectors, high definition (HD) televisions, wireless communication network products and power management ICs, among others. The Company operates its businesses primarily in Taiwan, Europe and the Americas. In August 2010, the Company acquired a 100% interest in EEMS Test Singapore.
The Company is focused on packaging and testing logic semiconductors. The Company offers its customers turnkey services, which consist of packaging, testing and direct shipment of semiconductors to end users designated by its customers. The Company�� global base of over 200 customers includes semiconductor companies across a range of end use applications, including Altera Corporation, ATI Technologies, Inc., Broadcom Corporation, Cambridge Silicon Radio Limited and Microsoft Corporation. During the year ended December 31, 2008, the Company�� packaging revenues accounted for 77.7% of its net revenues and its testing revenues accounted for 20.1% of its net revenues.
Packaging Services
The Company offers a range of package types to meet the requirements of its customers, with a focus on packaging solutions. Within its portfolio of package types, the Company focuses on the packaging of semiconductors. These include advanced leadframe-based package types, such as quad flat package, thin quad flat package, bump chip carrier and quad flat no-lead package, and package types based on substrates, such a! s flip-chip ball grid array (BGA) and other BGA types, as well as other packages, such as wafer-bumping products. Leadframe-based packages are packaged by connecting the die, using wire bonders, to the leadframe with gold wire. The Company�� leadframe-based packages include quad flat package (QFP)/ thin quad flat package (TQFP), quad flat no-lead package (QFN)/microchip carrier (MCC), advanced quad flat no-lead package (AQFN), bump chip carrier (BCC), small outline plastic package (SOP)/thin small outline plastic package (TSOP), small outline plastic j-bend package (SOJ), plastic leaded chip carrier (PLCC) and plastic dual in-line package (PDIP). Substrate-based packages employ the BGA design, which utilizes a substrate rather than a leadframe. It also assembles system-in-a-package products, which involve the integration of more than one chip into the same package. The Company�� substrate-based packages include Plastic BGA, Cavity Down BGA, Stacked-Die BGA, Flip-Chip BGA and land grid array (LGA).
The Company�� wafer-level packaging products include wafer level chip scale package (aCSP) and advanced wafer level package (aWLP). The Company offers module assembly services, which combine one or more packaged semiconductors with other components in an integrated module to enable functionality, typically using surface mount technology (SMT) machines and other machinery and equipment for system-level assembly. End use applications for modules include cellular phones, personal digital assistant (PDAs), wireless local area network (LAN) applications, bluetooth applications, camera modules, automotive applications and toys.
The Company provides module assembly services primarily at its facilities in Korea for radio frequency and power amplifier modules used in wireless communications and automotive applications. Interconnect materials connect the input/output on the semiconductor dies to the printed circuit board. Interconnect materials include substrate, which is a multi-layer m! iniature ! printed circuit board. The Company produces substrates for use in its packaging operations.
Testing Services
The Company provides a range of semiconductor testing services, including front-end engineering testing, wafer probing, final testing of logic/mixed-signal/radio frequency (RF) and memory semiconductors and other test-related services. The Company provides front-end engineering testing services, including customized software development, electrical design validation, and reliability and failure analysis. The Company provides final testing services for a variety of memory products, such as static random access memory (SRAM), dynamic random access memory (DRAM), single-bit erasable programmable read-only memory semiconductors and flash memory semiconductors.
The Company provides a range of additional test-related services, including burn-in testing, module sip testing, dry pack, tape and reel, and electric interface board and mechanical test tool design. The Company offers drop shipment services for shipment of semiconductors directly to end users designated by its customers.
Advisors' Opinion:- [By Jeff Reeves]
Advanced Semiconductor Engineering�(ASX) builds and distributes integrated circuits and other electronics. It�� not as sexy as some mobile chipmakers, but thankfully it doesn�� have to be — ASX is simply capitalizing on the general demand for microchips in everything from cars to computers to TVs.
- [By Seth Jayson]
Advanced Semiconductor Engineering (NYSE: ASX ) is expected to report Q2 earnings around July 7. Here's what Wall Street wants to see:
- [By Jeff Reeves]
Next Page
Best Stocks to Buy for Around $5: Advanced Semiconductor Engineering (ASX)Advanced Semiconductor Engineering�(ASX) builds and distributes integrated circuits and other electronics. While that�� not as sexy as other chipmakers that play to mobile, it�� still a good business, considering the general demand for microchips in everything from cars to computers to TVs.
Top 10 Semiconductor Stocks To Buy For 2014: GigOptix Inc (GIG)
GigOptix, Inc. (GigOptix), incorporated on March 2008, is a supplier of semiconductor and electro-optical component products that enables high-speed end to end data streaming over optical fiber and wireless telecommunications and data-communications networks globally. The Company's products convert signals between electrical and optical formats for transmitting and receiving data over fiber optic networks and between electrical and high speed radio frequencies to enable the transmission and receipt of data over wireless networks. The Company is creating both optical telecommunications and data-communications applications for fast growing markets in 10 giga bytes per second (Gbps), 40Gbps and 100Gbps drivers, receiver integrated circuits (IC), electro-optic modulator components and multi-chip-modules (MCM), as well as E-band wireless data-communications applications for high speed mobile backhaul and other high capacity wireless data transport applications. During the year ended December 31, 2011, the Company shipped over 150 products to over 200 customers.
The Company offers a portfolio of 10Gbps and 40Gbps electro-optical products and is developing market for 100Gbps products. The Company provides bundled solutions that consist of a few of its products, such as modulator and driver. The Company also offers a comprehensive portfolio of Monolithic Microwave Integrated Circuit (MMIC) and application-specific integrated circuit (ASIC) products to support E-band wireless communication and defense markets. The Company has also developed 10Gbps vertical cavity surface-emitting laser (VCSEL) drivers and receivers for aerospace as well as outdoor, non-temperature controlled environments that enables higher capacity in its customers' next generation flight and data center systems.
The Company has a portfolio of products for telecommunications , data-communications, defenses and industrial applications designed for optical speeds from 3Gbps to over 100Gbps and for wireless frequencies! from zero giga hertz (GHz) to 86GHz. The Company's products support a range of data rates, protocols, transmission distances and industry standards.
The Company's portfolio consists of the product ranges, such as laser and modulator drivers for 10Gbps, 40Gbps and 100Gbps applications; receiver amplifiers or Trans-impedance Amplifiers (TIAs) for 10Gbps, 40Gbps and 100Gbps applications; VCSEL driver and receiver chipsets for 14 and 12 channel parallel optics applications from 3Gbps to 10Gbps; Electro-optic modulators based on the Company's TFPS technology suitable for various 40Gbps and 100Gbps modulation schemes, such as differential phase shift keying (DPSK), differential quadrature phase shift keying (DQPSK), RZ-DQPSK and DP-QPSK; wideband monolithic microwave integrated circuit (MMIC) amplifiers with flat gain response; high frequency MMIC Power Amplifiers with high gain and output power; high frequency passive attenuators and filters in small form factors, and standard cell, and structured ASIC and hybrid ASIC designs and manufacturing service for multiple markets offering information technology acquisition review (ITAR) compliance for defense applications. The Company designs and market products that amplifies electrical signals during both the transmission (amplifiers and optical drivers) and reception (TIAs) of optical signals as well as modulate optical signals in the transmission of data.
The Company's optical drivers amplify the input digital data stream that is used to modulate laser light either by direct modulation of the laser or by use of an external modulator that acts as a precise shutter to switch on and off light to create the optical data stream. The Company supplies an optimized component for each type of laser, modulator and photo-diode depending upon the speed, reach and required cost. The Company's microwave and millimeter wave amplifiers amplify small signal radio signals into more signals that can be transmitted over long distances to establish high t! hroughput! data connections or enable radar based applications. The Company's ASIC solutions are used in a number of applications such as defense and test and measurement applications to enable the high speed processing of complex signals.
The Company's product portfolio is designed to cover the range of solutions needed in these different modules. The Company's product portfolio consists of five product lines: GX Series, which includes serial drivers and TIA ICs devices for telecom and data-com markets; HX Series, which includes multi-channel driver and TIA ICs for short reach data-com and optical interconnect applications; LX Series, which includes TFPS modulators for high speed telecom and defense applications; EX Series, which includes amplifiers, filters and attenuators for microwave applications in defense and instrumentation, and CX Series, which includes family of ASIC solutions for custom integrated circuit design.
GX Series
The GigOptix GX Series of products services both the telecom and data-com markets with a broad portfolio of drivers and transimpedence amplifiers that address 10Gbps, 40Gbps and 100Gbps speeds over distances that range from 100 meters to 10,000 kilometers. The GX Series devices are used in FiberChannel, Ethernet, synchronous optical networking (SONET)/ synchronous digital hierarchy (SDH) components and those based upon the optical internetworking forum (OIF) standards.
HX Series
The GigOptix HX Series of products service the high performance computing (HPC), data-com and consumer markets with a portfolio of parallel VCSEL drivers and TIAs that address 3Gbps, 5Gbps,10Gbps, 14Gbps, 16Gbps and 25Gbps channel speeds over 100-300 meters distances in four and 12 channel configurations. The HX Series devices are used in HPC formats, Infiniband, Ethernet and optical high definition multimedia interface (HDMI) components.
LX Series
The GigOptix LX Series of products service the 40Gbps and above telecom! market f! or Mach-Zehnder modulators. The LX Series devices are based on the Company's TFPS EO material technology.
EX Series
The GigOptix EX Series of products leverages the high performance products acquired in the Endwave acquisition. In addition, it also includes the die and design techniques developed for the GX Series telecom and data-com drivers for related defense and instrumentation applications.
CX Series
The GigOptix CX Series of products offers a portfolio of distinct paths to digital and analog mixed signal ASICs with the capability of supporting designs of up to 10M gates in technologies ranging from 0.6 through 65nm. The CX Series uses the Company's technology in Structured and Hybrid ASICs to enable a generic ASIC solution that can be customized for a customer using only a few metal mask layers. The CX Series also offers ASIC services, including Analog and Mixed Signal IP into designs and taking customers designs from RTL or gate-level net list definitions to volume production with third party foundries.
The Company competes with TriQuint, Rohm, InPhi, Centellax, Semtech, Vitesse, M/A-Com, Avago, Emcore, Tyco Electronics, IPtronics. Avago, Emcore, Tyco Electronics, JDSU, Oclaro, Sumitomo, Fujitsu, Emcore, Oclaro, Hittite, Sumitomo, Hittite, RFMD, Northrop Grumman, On -Semiconductor, eSilicon, Open Silicon, Faraday, Toshiba and eASIC.
Advisors' Opinion:- [By maarnio]
Lightwave Logic�� main competitor is GigOptix (GIG). GigOptix has designed and patented potentially commercially feasible electro-optic polymers and holds an exclusive license to all electro-optic polymeric technology developed at the University of Washington.
- [By Bryan Murphy]
It's admittedly overbought and due for a slight dip thanks to today's surge. But when you take a step back and look at GigOptix Inc. (NYSEMKT:GIG), there's actually a lot to be excited about if you've been mulling a trading in GIG. The trick will be getting the timing right.
No comments:
Post a Comment